Product Categories

Alumalite HD Liner Cut Tool

 

Alumalite HD Liner Cut Tool

The Alumalite HD Liner Cut tool is a precision, hand-held

device utilizing a standard single edged razor blade. The

blade depth adjustment is as simple as using a screw driver,

which can control the depth of cut to less than a thousandth

of an inch. The blade can be mounted on either side of the

unit, for either left hand or right hand operation.

 

The blade is on the outside surface of the Alumalite HD Liner

Cut tool so that it is in contact with your safety ruler or straight

edge, giving you the perfect cut where you want it.

 

 

Here are only some of the many uses for the Alumalite HD

Liner Cut tool: Cut the liner and not the label or pressure

sensitive film, make "cut and peal" liners on any brand or

type of vinyl film, cut only the top sheet of layers of

newspaper, Kraft paper, butcher paper, photographic

papers and for cutting in precision corrections in positive

or negative film, etc.

 

  • Make "cut and peal" liners on any brand or type of vinyl film.
  • Scribes or cuts a top layer of film or paper without affecting carrier sheet.
  • Uses a single edged razor blade which lasts longer because the blade is held accurately without waver, wander or wobble.
  • Lower cost blade replacement. 
  • Cuts squarely against your safety ruler.
  • Longer life of blades
  • Completely safe operation
  • Makes it impossible to cut into the straight edge.
  • Eliminates cut fingers compared to other types of cutting knives. 

The Alumalite HD Liner Cut is a precision instrument. Do not drop or place blade edge down on a hard surface. With just a little practice, the Alumalite HD Liner Cut tool will give faster, squarer, more accurate and controlled depths of cut.

pdf download mp3 download